Adam Dawud

Home / Projects / Active / Gundam

0.1 - Energy Charge Gundam

project 2026-06-13
#type/project#project/gundam#topic/arduino#topic/electronics#education#temperature-sensor#area/projects#status/active#topic/education#topic/robotics

Project Plan: Energy Charge Gundam

1. Overview

Description:

Simple experimental program to demonstrate basic arduino concepts with cheap tools. Uses a temperature sensor to detect if temperature is above baseline room temperature, which then charges a Gundam’s shield.

The Repo for the code is up on Codeberg! Will update ASAP

2. Objectives

  1. Objective 1 - Understand basic Arduino programming
  2. Objective 2 - Provides an educational document to explain how certain components work.
  3. Objective 3 - Use the document to keep as notes and share allowing teachers to use them for educational purposes.

Parts

1x Microcontroller (Arduino Uno was used) 1x TMP36 (Temperature Sensor - Generally included in most Arduino kits) 1x Breadboard (Optional) 3x LEDs 3x 220 Ohm Resistors. Wires.